AES 7170 Uživatelský manuál stáhnout pdf (Strana 80)

40-7705I-UM Page 80 Rev 4 March 16, 2007

Function Explanation

ZONE CONFIGURATION

• Press <ALT> + <P>

• Press <Z>

• Select Target Unit

• Select Route

• Edit form as necessary

See below for details on data entry for this function:

This function configures alarm zone inputs for a premise unit. It is

important to know which type of unit is being programmed. There are

separate sub-menus to handle the different subscriber units. The sub-

menu that will be presented upon selection of a subscriber ID is based on

the database entries. The subscriber model may be selected during setup

in the Admin GUI and using the Get All function in the message group

will update all fields required to identify the unit.

Subscriber models include:

7050/7750-UL (Version 1.8 or older) 7750

7050-E (Version 1.8 or older) 7750F 4X4

7050-E / F8 (Version 2.0 and newer)

To access the Programming function menu group, hold down the <Alt>

key and Press <P>. The Programming window illustrated below will

appear. Select zone Configuration then [OK]. Proceed by selecting your

target unit and choosing a route of communication.

Sample Zone Configuration windows for the various Subscribers are

shown below.

Fire/Inverted Fire programming notes:

If the Subscriber type selected supports Fire and Inverted Fire

programming, these notes apply to the programming sequence and the

following questions will appear before the zone programming selection

window.

Figure 11-16

The programming sequence first asks if any zones are to be programmed

to respond similar to a "Fire circuit". This is not to be confused with the

device usage, but rather how changes to the EOL will be reported. Click

yes if you wish to have the zone report "Trouble" conditions on an open

circuit and alarm on a short. Otherwise click No for alarm message to be

reported on a short or open. A raised appearing button indicates the

default or current programming, if it is stored in the database from a

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 110 111

Žádné komentáře

AES 7170 Uživatelský manuál Strana 80